We’ll have some mate while waiting for the upstream provider port to go into no shutdown They provide us co-location too, so I installed the core router on their shelter, which is backed up by dual A/C systems and dual UPS-rectifier systems. They are using a MikroTik CRS326-24G-2S+ for their edge router, which will be enough for their 100 Mbps service. Main customer will be directly connected to this router using copper at 1 Gbps. Although it has SFP+ ports to allow 10 Gbps operation, at the moment the links will be negotiated using SFP modules at 1000 Mbps. We’ll use a MikroTik CCR1036-8G-2S+ as the border router.

Both providers has approximately the same AS-PATH. There is no need to use the full table- yet. Service is provided with two providers, and BGP sessions must be established with both to announce a /24 prefix of our AS, and probably receive just a default route from the upstream. My first time seeing the mighty Paraná river Connecting People This was the main task among another small consulting and assistance. My current company is establishing operations on Entre Rios province, where a we are initiating a brand-new ISP service for the towns of Crespo, Libertador San Martin, and Paraná City. I took two flights, the first one with a little stop at Aeroparque ( AEP), and then a short one to Paraná city ( PRA). It is possible to make ROS nodes to boot up with a user-defined startup config instead of a built-in one.It is always nice to fly. Vr-ros nodes come up with a basic 'blank' configuration where only the management interface and user is provisioned.

These addresses can be used to reach management plane of the router.ĭata interfaces eth1+ needs to be configured with IP addressing manually using CLI/management protocols. When containerlab launches vr-ros node, it will assign IPv4/6 address to the eth0 interface.

eth2+ - second and subsequent data interface.

eth1 - first data interface, mapped to the ether2 interface of the RouterOS.

eth0 - management interface connected to the containerlab management network.

Vr-ros container can have up to 30 interfaces and uses the following mapping rules:

Cumulus Linux (docker runtime) and Hostĭefault user credentials: admin:admin Interfaces mapping #.

5-stage SR Linux based Clos fabric with config engine.

MikroTik RouterOS MikroTik RouterOS Table of contents.

Mikrotik chr docker